src="files/01_blog-hero_1500x900_c4fb555a-9c81-4f4d-9761-78e5b15927c4.jpg">
Mounting a Cat Wall: How to Make It Hold – Step by Step
Check the wall, choose the plug, drill cleanly: here's how to mount your cat wall so it takes even wild leaps in its stride.
Why the wall matters more than the screw
You can mount a cat wall securely if you keep three things in mind: identify your type of wall, choose a wall plug that suits it, and follow the product's assembly instructions. Because whether a cat wall holds depends on the combination of wall and plug – not on the screw alone.
Maybe you know the feeling: the step is mounted, exactly as described. And yet it gives a little when you press against it with your hand. Most of the time, that's not down to the furniture, but to the plug.
What's in the box – and what it's good for
Our wall furniture usually comes with standard wall plugs and screws. Exactly what's included is listed in the assembly instructions for each product. In solid walls, they're often all you need. In plasterboard, hollow brick, aerated concrete or crumbly plaster in older buildings, you'll usually need different plugs. So the plugs in the box are a starting point, not a solution for every wall.
Our wall furniture is designed for cats of every weight – provided the plug suits the wall and the mounting is done properly.
Cats aren't books
A shelf puts an even load on the wall. Your cat, on the other hand, pushes off, lands with momentum and sometimes races across several steps. With elements that stick out far from the wall, leverage comes into play too. So it's better to plan the fixing generously.
The good news: you don't need to be a pro. The next section shows you how to identify your wall in two minutes. And we explain which plug suits your wall in detail in a separate article.
Why the wall matters more than the screw
You can mount a cat wall securely if you keep three things in mind: identify your type of wall, choose a wall plug that suits it, and follow the product's assembly instructions. Because whether a cat wall holds depends on the combination of wall and plug – not on the screw alone.
Maybe you know the feeling: the step is mounted, exactly as described. And yet it gives a little when you press against it with your hand. Most of the time, that's not down to the furniture, but to the plug.
What's in the box – and what it's good for
Our wall furniture usually comes with standard wall plugs and screws. Exactly what's included is listed in the assembly instructions for each product. In solid walls, they're often all you need. In plasterboard, hollow brick, aerated concrete or crumbly plaster in older buildings, you'll usually need different plugs. So the plugs in the box are a starting point, not a solution for every wall.
Our wall furniture is designed for cats of every weight – provided the plug suits the wall and the mounting is done properly.
Cats aren't books
A shelf puts an even load on the wall. Your cat, on the other hand, pushes off, lands with momentum and sometimes races across several steps. With elements that stick out far from the wall, leverage comes into play too. So it's better to plan the fixing generously.
The good news: you don't need to be a pro. The next section shows you how to identify your wall in two minutes. And we explain which plug suits your wall in detail in a separate article.
The two-minute wall check
Start by knocking on the wall. If it sounds hollow, it's usually plasterboard. You can identify the material reliably from the dust of a test hole – that's also how the fixing guide from fischer (in German) describes it. Also pay attention to how the drill feels.
Which wall is it?
- Concrete: very hard, the drill only makes slow progress, the dust is grey and very fine.
- Solid brick and sand-lime brick: solid; red dust points to brick, white and sandy dust to sand-lime brick.
- Hollow brick: red dust, but the resistance suddenly drops at a certain depth.
- Aerated concrete: soft and noticeably easy to drill.
- Plasterboard: sounds hollow, the dust is white, fine and slightly sticky.
- Older buildings: often mixed masonry and crumbly plaster – every wall can be a little different here.
You'll find which plug belongs in which wall in our guide Which wall plug for which wall?
Plasterboard? Ideally into the studs
You can mount our wall furniture in plasterboard with cavity plugs. If possible, though, we recommend fixing it to the studs behind the board. That way the screw sits in the load-bearing frame of the wall, not just in the board. How to find the studs is also explained in the plug guide.
And without drilling?
Our wall furniture is screwed to the wall. If you can't or don't want to drill, cat furniture that stands on the floor is the better choice.
The two-minute wall check
Start by knocking on the wall. If it sounds hollow, it's usually plasterboard. You can identify the material reliably from the dust of a test hole – that's also how the fixing guide from fischer (in German) describes it. Also pay attention to how the drill feels.
Which wall is it?
- Concrete: very hard, the drill only makes slow progress, the dust is grey and very fine.
- Solid brick and sand-lime brick: solid; red dust points to brick, white and sandy dust to sand-lime brick.
- Hollow brick: red dust, but the resistance suddenly drops at a certain depth.
- Aerated concrete: soft and noticeably easy to drill.
- Plasterboard: sounds hollow, the dust is white, fine and slightly sticky.
- Older buildings: often mixed masonry and crumbly plaster – every wall can be a little different here.
You'll find which plug belongs in which wall in our guide Which wall plug for which wall?
Plasterboard? Ideally into the studs
You can mount our wall furniture in plasterboard with cavity plugs. If possible, though, we recommend fixing it to the studs behind the board. That way the screw sits in the load-bearing frame of the wall, not just in the board. How to find the studs is also explained in the plug guide.
And without drilling?
Our wall furniture is screwed to the wall. If you can't or don't want to drill, cat furniture that stands on the floor is the better choice.
Step by step to a cat wall that holds
Your mounting checklist:
- Read the assembly instructions: tools, contents and drilling distances are in the PDF on the product page.
- Locate cables and pipes: check with a detector and keep enough distance from power lines and water pipes.
- Check the wall: knock test and test hole.
- Choose the right plug and check the load rating on the pack.
- Drill straight – use the drill bit diameter and hole depth stated on the plug pack. Then vacuum out the hole.
- Choose a screw to match the plug: the plug manufacturer states which thickness and length fits.
- Cover the screw heads with the stickers provided, where included.
- Put your weight on it by hand – only then is it your cat's turn.
Why stickers rather than caps? Small caps could come loose and be swallowed. We deliberately avoid them.
Our wall furniture
The SWING cat hammock holds up to 15 kg and has room for two cats. With the STEPS cat stairs, size is what counts: we recommend STEPS for cats up to 7 kg and the larger STEPS XL for cats up to 10 kg. For your complete cat wall, combine steps, beds and scratching surfaces such as CATWALK, STRAIGHT or CORNER – or start with the CATWALK cat wall set. For planning ideas, read A paradise for your cat – a cat wall.
Still unsure about the plug? Then read which plug suits your wall or ask at a hardware store. And then comes the best moment: your cat jumps up for the first time – and nothing wobbles.
Step by step to a cat wall that holds
Your mounting checklist:
- Read the assembly instructions: tools, contents and drilling distances are in the PDF on the product page.
- Locate cables and pipes: check with a detector and keep enough distance from power lines and water pipes.
- Check the wall: knock test and test hole.
- Choose the right plug and check the load rating on the pack.
- Drill straight – use the drill bit diameter and hole depth stated on the plug pack. Then vacuum out the hole.
- Choose a screw to match the plug: the plug manufacturer states which thickness and length fits.
- Cover the screw heads with the stickers provided, where included.
- Put your weight on it by hand – only then is it your cat's turn.
Why stickers rather than caps? Small caps could come loose and be swallowed. We deliberately avoid them.
Our wall furniture
The SWING cat hammock holds up to 15 kg and has room for two cats. With the STEPS cat stairs, size is what counts: we recommend STEPS for cats up to 7 kg and the larger STEPS XL for cats up to 10 kg. For your complete cat wall, combine steps, beds and scratching surfaces such as CATWALK, STRAIGHT or CORNER – or start with the CATWALK cat wall set. For planning ideas, read A paradise for your cat – a cat wall.
Still unsure about the plug? Then read which plug suits your wall or ask at a hardware store. And then comes the best moment: your cat jumps up for the first time – and nothing wobbles.
Entdecke LucyBalu
Search our shop